Card name: Matrox Millennium G450 DVI
Manufacturer: Matrox Graphics Inc.
Chip type: Matrox G450
DAC type: Integrated, 360 MHz
Device Key: Enum\PCI\VEN_102B&DEV_0525&SUBSYS_23C3102B&REV_85
Display Memory: 32.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: AOC 2217
Monitor Max Res: 1680,1050
Driver Name: G400DHD.dll
Driver Version: 6.12.0001.2000 (English)
DDI Version: unknown
Driver Attributes: Final Retail
Driver Date/Size: 2/6/2009 13:19:18, 2399872 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: g400dhm.sys
Mini VDD Date: 2/6/2009 13:19:52, 350592 bytes
Device Identifier: {D7B71ECB-4665-11CF-4B74-C20326C2CB35}
Vendor ID: 0x102B
Device ID: 0x0525
SubSys ID: 0x23C3102B
Revision ID: 0x0085
Revision ID: 0x0085
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Not Available
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run

I keep getting a 122 error when I try to log on. no suitable video detected or something like that.
Machine name: IBM-ABC-M-PRO
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090804-1435)
Language: English (Regional Setting: English)
System Manufacturer: IBM
System Model: -[621910U]-
BIOS: IBM BIOS Ver M6E1.31
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz
Memory: 2304MB RAM
Page File: 481MB used, 2054MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. Direct3D functionality not available. You should verify that the driver is a final version from the hardware manufacturer.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.

Any help would be greatly appreciated. Thank you.